设为首页 | 收藏本站 | 联系我们
网站首页
HOMEPAGE
公司简介
ABOUT US
产品展示
PRODUCTS
新闻中心
NEWS CENTER
产品知识
KNOWLEDGE
服务网络
NETWORK
客户反馈
FEEDBACK
联系我们
CONTACT US
 
  • 板式冷却器





    华航液压
  • 板式冷却器





    华航液压
  • 板式冷却器





    华航液压


联系我们 CONTACT US

地    址:南通市海安南 莫高扬工业园区
电    话:+86-0513-88486051
传    真:+86-0513-88487758

手    机 :15862734680(崔经理)

维修热线:18796795379(刘工)
E-MAIL:hhlqq8@126.com


 
信息浏览
+ 您现在的位是: 板式冷却器      信息浏览


板式冷却器      为何说 是新式高效板式冷却器     
发布时间: 2014-12-11 

  
  板式冷却器      是由一系列具有必定波纹形状的金属片叠装而成的一种新式高效板式冷却器      。各种板片之间构成薄矩形通道,通过板片进行热量交流。板式冷却器      是液—液、液—汽进行热交流的抱负设备。它具有换热效率高、热丢失小、构造紧凑 轻盈、占地面积小、设备清洁便利、运用广泛、运用寿命长等特色。
  
  Plate type cooler is a metal sheet has a corrugated shape by a series of overlapping a novel efficient cooler into. Thin rectangular channel is formed between the various plates, heat exchange through the plate. Plate type cooler is a liquid - liquid, liquid - vapor heat exchange ambition equipment. It has high heat transfer efficiency, small heat loss, compact structure, small occupation area, light equipment cleaning convenience, wide application, long life and other characteristics of.
  
  在一样压力丢失情况下,其传热系数份额管式板式冷却器      高3-5倍,占地面积为管式板式冷却器      的三分之一,热回收率可高达90%以上。
  
  The pressure loss in the same condition, the heat transfer coefficient of 3-5 times higher share of tube plate type cooler, covers an area of 1/3 tubular plate cooler, heat recovery rate can be as high as 90%.
  
  板式冷却器      (Plate Type Heat Exchanger),本成套设备由板式板式冷却器      、平衡槽、离心式清洁泵、热水设备(包含蒸汽管路、热水喷入器)、支架以及外表箱等构成。用于牛奶或其它热敏理性液体之灭菌冷却。
  
  Plate type cooler (Plate Type Heat Exchanger), the complete set of equipment is composed of plate cooler, balance tank, centrifugal pump, hot water cleaning equipment (including steam pipe, hot water is sprayed into the reactor), bracket and appearance box form. Used for milk or other heat sensitive rational liquid sterilization cooling.
  
  欲处理的物料先进入平衡槽,经离心式清洁泵送入板式冷却器      、通过预热、灭菌、保温、冷却各段,凡未到达灭菌温度的物料,由外表操控气动回流阀换向、再回到平衡槽重新处理。物料灭菌温度由外表操控箱进行自动操控和接连记载,以便对灭菌进程进行监督和查看。此设备适用于对牛奶预灭菌、巴式灭菌。板式板式冷却器      的型式首要有框架式(可拆卸式)和钎焊式两大类,板片方式首要有人字形波纹板、水平平直波纹板和瘤形板片三种。
  
  To handle the material entering the balance groove, the centrifugal pump into the cooler through cleaning, sterilization, heat preservation, preheating, cooling section, where not reach sterilization temperature material, by the appearance control pneumatic reflux valve reversing, back to the balance groove re processing. The material sterilization temperature automatic manipulation and successive records by the appearance of control box, to supervise and check on the sterilization process. This equipment is suitable for the sterilization of milk, pre pasteurization. Plate type cooler in the first frame (removable) and brazing type two kinds big, plate mode first and foremost a herringbone corrugated plate, corrugated board and the tumor shape horizontal flat plate three.
文章来源: 板式冷却器      www.,转载请标明出处, 谢谢合作!
分享到:

Copyright 2014-2015 ALL RIGHTS RESERVED 板式冷却器      领导者品牌 -海安华航换热器制 造厂 版权所有
地 址:南通市海安南 莫高扬工业园区 服务热线: 0513-88486051 传 真:0513-88487758邮 编:226000

友情链接: 板式冷却器      价格 | | | |

友情链接:    幸运飞艇公式投注   KG十三水   手机上买彩票哪个正规   幸运飞艇公式手机版   网上炸金花真钱款